Description
Spin-on Filters
- Maximum operating pressure: Up to 1.2 MPa (12 bar)
- Flow rate: Up to 365 l/min
The MPS is a spin-on filter series suitable for use in suction, return, and low-pressure lines. They offer a balanced combination of performance, dimensions, and cost. These filters are directly connected to the system lines through hydraulic fittings.
Available Features:
- Female threaded connections: Up to 1 1/2", and flanged connections up to 1 1/2", with a maximum flow rate of 365 l/min.
- Fine filtration rating: To improve tank cleanliness level.
- Water removal elements (CW): To remove free water from hydraulic fluid.
- Dual port box connections: To fit both European and American standard elements.
- Dual can fitment: To extend filter service life.
- Bypass valve: To relieve excessive pressure drop across the filter media.
- Visual, electrical, and electronic clogging indicators: For suction and return applications.
- Visual, electrical, and electronic differential clogging indicators: For low-pressure applications.
General Applications:
- Suction lines, return lines, and delivery lines in cost-effective industrial equipment or mobile machinery.
- Off-line filtration tanks in cost-effective industrial equipment or mobile machinery.
Filter Housing Materials
- Head: Aluminum
- Bypass valve: Nylon - Steel
- Element: Zinc-coated steel - Painted steel
Bypass Valve
- Return filter opening pressure: 175 kPa (1.75 bar) ±10%
- Suction filter opening pressure: 30 kPa (0.3 bar) ±10%
Δp Element Type
- Δp: 5 bar
- Fluid flow through the filter element: Outside to inside (OUT to IN)
Seals
- Standard NBR: A series
Temperature
- From -20 °C to +110 °C
Note
- The MPS filters are designed for vertical installation.
